Jains Irrigation Systems Ltd.

Jain Irrigation Systems Limited (JISL), has an unmatched and enviable performance track record as a Total Solution Provider for various thermoplastics piping systems such as for Agriculture, Water, Gas, Telecom, Utility, Sewerage, Chemicals, Industrial Effluents, Mining, Slurry, Coal ash, SWR, Sub soil drainage, Ground water tapping, Lift irrigation, Micro irrigation & sprinkler irrigation, Hand pumps, House service Connections etc.

We are the only manufacturer of 1600 mm dia HDPE pipe and its fittings in India . We have with us more than 9000 associates worldwide and revenue of more than 60 billion rupees with manufacturing plants in 28 locations across the globe, having network of more than 3000 Distributors & Dealers worldwide.

JISL from its noble range brings to you JAIN Plumbing UPVC ASTM Pips and Fittings systems for all your domestic and high pressure cold water plumbing requirments.

Jain Plumbing high quality UPVC ASTM Plumbing pipes and fittings are manufactured in line with major international standards and parameters. The range encompasses both Solvent Welded and Threaded piping pertaining to various applications from residential and commercial to industrial plumbing.

Features & Advantages

Smooth inner surface.
EPDM rubber link joint.
Uniform wall thickness.
Non corrosive.
Lightweight & strong.
Easy to install.
UV Stabilized-Wheather resistant.
Durable, Long life & Economical.
High quality Standard.
Maintenance Free

SWR Pipe Dimension Chart

Nominal outside diameter (D) mm	Tolerance on outside diameter mm	Wall Thickness Type-A(A)mm		Wall Thickness Type-B(A)mm		Wall Thickness (Nonstandard)(t)mm
Nominal outside diameter (D) mm	Tolerance on outside diameter mm	min	max	min	max	min	max
75	+0.3	1.8	2.2	3.2	3.8	1.4	1.6
90	+0.4	1.9	2.3	3.2	3.8	-	-
110	+0.4	2.2	2.7	3.2	3.8	1.5	1.65
160	+0.5	3.2	3.8	4.0	4.6	2.7	3.2

Installation Procedure

To cut SWR pipe straight .
To properly place the elastomeric ring in its groove.
To avoid over tightening of door cap.
To use pipe clips at proper spacing to align the pipe stack properly.
Appropriate water seal traps are used where ever necessary before connecting it to the main stack.
To use Perma-Fix solvent cement for socketed joints.

Rubber Ring Joints

	1) Cut pipe square to the required length
	2) chamfer the edge of the pipe. Remove all burrs, dust and dirt.
	3) Apply lubricant on the external surface of the pipe and on the elastomeric ring.
	4) Make sure the sealing ring is placed Correctly in the groove.
	5) Push the pipe into the socket.
	6) Ensure 10 mm gap between the pipe end and the socket register for thermal expansion and contraction.

Solvent Welded Joint

	1) Cut pipe square to the required length.
	2) Remove all burrs & grease if any, from the intermal & extemal surfaces
	3) Apply solvent cement uniformly on the inner surface of fitting and outer surface of pipe.
	4) Insert the pipe end in to socket end & push it fully in. turn around pipe for 45^°, wait for curing time.